Home > Nimonic 80A Sheet and Plates
Okoye Nickel Alloys is a well-respected manufacturer and supplier based in Kinshasa, Congo, known for providing top-notch Nimonic 80A Sheets and Plates to a variety of industrial sectors. With a strong dedication to precision engineering and adherence to international quality standards, the company guarantees that each product meets the rigorous demands of high-temperature and high-stress environments. By blending advanced manufacturing techniques with a customer-centric approach, Okoye Nickel Alloys delivers reliable, durable, and high-performance Nimonic 80A solutions. Their expertise, technical skill, and consistent supply chain make them a go-to partner for industries across Congo in need of trustworthy nickel-based alloy sheet and plate materials.
Nimonic UNS N07080 is a high-performance nickel-chromium alloy primarily composed of nickel (up to 80%), chromium (15-17%), and iron (up to 5%). It also contains small additions of titanium (0.3-1%), aluminum (0.2-0.5%), and molybdenum (1-2%) to enhance its mechanical properties. This alloy exhibits excellent mechanical strength, high-temperature oxidation resistance, and good creep resistance up to around 800°C. It has a tensile strength of approximately 900-1100 MPa and a yield strength of 500-700 MPa, making it suitable for use in turbine blades, combustion chambers, and other high-stress aerospace and industrial applications.
| Standards : | ASTM B637 / ASME SB637 |
| Dimensions : | ASTM, ASME, and API |
| Sheets Thickness : | Range from .008″ to .0125″ |
| Shims Thickness : | Range from .01″ to .0125″ |
| Plates Thickness : | Ranges from .0125″ to 5.00″ |
| Sheets/Plates Width : | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Sheets/Plates Length : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Tempers : | Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard |
| Hardness : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Value Added Service : | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Plate, Sheet and Strip : | BS HR 203, DIN 17750, AECMA PrEN2293, AECMA PrEN2302, AECMA PrEN2411, ISO 6208 |
| Grade | Al | B | C | Cr | Co | Cu | Fe | Mn | Ni | P | Si | S |
| Nimonic 80A | 1 – 1.8 | 0.008 max | 0.1 max | 18 – 21 | 0.2 max | 0.2 max | 3 max | 1 max | Balance | 0.045 max | 1 max | 0.015 max |
| Grade | Condition | Ultimate Tensile Strength MPA | Yield Strength MPA | Elongation on 4D (min) | Hardness min |
| Nimonic 80A | Solution Annealed & Precipatation Treated (aged) | 994 | 616 | 20 | 300 HV |
| WEIGHT PER NIMONIC SHEET : | ||||
| THICKNESS IN MM | SIZE IN MM | WEIGHT KG/M2 | ||
| 2000 X 1000 | 2500 X 1250 | 3000 X 1500 | ||
| 0.18 | 2.88 | – | – | 1.44 |
| 0.20 | 3.20 | – | – | 1.60 |
| 0.22 | 3.52 | – | – | 1.76 |
| 0.24 | 3.84 | – | – | 1.92 |
| 0.27 | 4.32 | – | – | 2.16 |
| 0.28 | 4.48 | – | – | 2.24 |
| 0.32 | 5.12 | – | – | 2.56 |
| 0.38 | 6.08 | – | – | 3.04 |
| 0.44 | 7.04 | 11.00 | – | 3.52 |
| 0.50 | 8.00 | 12.50 | – | 4.00 |
| 0.56 | 8.96 | 14.00 | – | 4.48 |
| 0.63 | 10.08 | 15.75 | – | 5.04 |
| 0.75 | 12.00 | 18.75 | – | 6.00 |
| 0.88 | 14.08 | 22.00 | – | 7.04 |
| 1.00 | 16.00 | 25.00 | 36.00 | 8.00 |
| .1.13 | 18.08 | 28.25 | 40.00 | 9.04 |
| 1.25 | 20.00 | 31.25 | 45.00 | 10.00 |
| 1.38 | 22.03 | 34.50 | 50.00 | 72.00 |
| 1.50 | 24.00 | 37.50 | 54.00 | 12.00 |
| 1.75 | 28.00 | 43.75 | 63.00 | 14.00 |
| 2.00 | 32.00 | 50.00 | 72.00 | 16.00 |
| 2.25 | 36.00 | 56.25 | 81.00 | 18.00 |
| 2.50 | 40.00 | 62.50 | 90.00 | 20.00 |
| 2.75 | 44.00 | 68.75 | 99.00 | 22.00 |
| 3.00 | 48.00 | 75.00 | 108.00 | 24.00 |
| 3.25 | 52.00 | 81.25 | 117.00 | 26.00 |
| 3.50 | 56.00 | 87.50 | 126.00 | 28.00 |
| 3.75 | 60.00 | 93.75 | 135.00 | 30.00 |
| 4.00 | 64.00 | 100.00 | 144.00 | 32.00 |
| 4.25 | 68.00 | 106.25 | 153.00 | 34.00 |
| 4.50 | 72.00 | 112.50 | 162.00 | 36.00 |
| 5.00 | 80.00 | 125.00 | 180.00 | 40.00 |
| 5.50 | 88.00 | 137.50 | 198.00 | 44.00 |
| 6.00 | 96.00 | 150.00 | 216.00 | 48.00 |
| 6.50 | 104.00 | 162.50 | 234.00 | 52.00 |
| 7.00 | 112.00 | 175.00 | 252.00 | 56.00 |
| 7.50 | 120.00 | 187.50 | 270.00 | 60.00 |
| 8.00 | 128.00 | 200.00 | 288.00 | 64.00 |
| STANDARD | WERKSTOFF NR. | UNS |
| Nimonic 80A | 2.4952 | N07080 |
Nimonic 80A Sheets and Plates are primarily made up of nickel, chromium, and titanium, with carefully controlled amounts of aluminum and carbon added to boost strength and oxidation resistance. These materials showcase impressive mechanical properties, such as high tensile strength, excellent creep resistance, and remarkable stability at elevated temperatures. They maintain their mechanical integrity even under thermal cycling and corrosive conditions, making them perfect for demanding applications. Additionally, the alloy provides good fatigue resistance and weldability, ensuring dependable performance in components that face continuous stress and extreme operational environments.
Contact us to get a quick quote for your requirement.
The Nimonic 80A Sheets and Plates offered by Okoye Nickel Alloys in Kinshasa, Congo, find extensive use in industries that need materials capable of enduring high temperatures and stress. These applications include aerospace turbine components, gas turbine blades, exhaust systems, and heat-treatment equipment. They are also utilized in nuclear engineering, chemical processing plants, and high-performance automotive sectors. Thanks to the alloy’s outstanding oxidation resistance and mechanical strength, it is ideal for fabricating combustion chambers, fasteners, and springs, making it a versatile choice for various demanding applications.
